Storage; Disposal And Recycling - Scheppach MR196-61 Traducción De Las Instrucciones Originales De Funcionamiento

Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables. Wear parts*: Spark plug, air filter, pet-
rol filter, blade, v-belt, battery, blade, tyres
* Not necessarily included in the scope of delivery

10. Storage

Storage for prolonged periods without operation
Allow the engine to cool before storing the machine in
an enclosed space.
Store the ride-on mower with empty fuel tank and the
fuel reserve in a lockable and well-ventilated room.
Never store the machine with petrol in the fuel tank in-
side a building in which the petrol fumes could come
into contact with naked flames or sparks.
If the tank has to be emptied (e.g. immobilisation be-
fore the winter break), the fuel tank must be emptied
out of doors only (empty the tank by running the en-
gine out of doors, for example).
Store the machine in good operational condition.
The ignition key must always be removed and kept in
a safe place, to prevent unauthorised or improper use
by children or other persons.
Thoroughly clean the ride-on mower before storage
(e.g. winter break). Dry grass residues and leaves
near to the muffler may ignite.
Danger of combustion!
Allow the machine to cool down completely before
covering it.
Perform all the necessary maintenance operations
before storing the machine.
The battery cables must be disconnected if the ride-
on mower is immobilised for longer periods. SCHEP-
PACH recommends removing the battery and storing
it in a dry and locked place.
Ensure that batteries are protected from unauthor-
ised use (e.g. by children).
Charge the battery during the winter 1-2 times
to ensure that the full charging capacity is main-
tained. Incorrect storage can damage the battery
and is excluded from the guarantee.
 www.scheppach.com /  [email protected] /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Transport
Transporting the ride-on mower
On account of its own weight, the ride-on mower can
cause severe crush injuries. Particular care must be
taken when loading or unloading the ride-on mower
onto/from a vehicle or trailer for transport purposes.
This ride-on mower must not be towed. For transport-
ing on public roads, a suitable vehicle or a suitable
trailer must be used.
Secure the ride-on mower on a loading area during
transport. Always engage the parking brake.
Prior to transporting or storage, disengage the drive
to the mowing blade or attachments.
When transporting the machine, always observe re-
gional legislation, especially regarding load security
and the transport of objects on load floors.
Allow the machine, in particular the engine and muf-
fler, to cool down completely after loading and before
further transport. The load floor and the area around
the muffler and engine must be kept free of combusti-
ble materials such as straw, leaves or dry grass resi-
dues.
Always remove the ignition key

11. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
GB | 51