Programming; Programming.via.keyboard.103/65; Programming.via.local.keypad; Programming.parameters - Urmet BiBus sinthesi s2 Manual De Instrucciones

PROGRAMMING

The module can be programmed in three ways
when the system is powered:
1. Via.external.keyboard.103/65.(recommended.
method).
2 Via local numeric keypad without opening the
frame. The programming password is required
for.this.operation..
3. Via.PC.connection..
Repetitive.beeps.and.a.message.on.the.display.in.
programming will signal that other modules with the
same. ID. are. present.. Change. the. station. number.
(ID).in.this.case..
PROGRAMMING VIA KEYBOARD 1032/65
Programming. mode. is. entered. automatically. by.
connecting.the.external.keyboard.to.the.call.module..
Programming. mode. is. quitted. by. disconnecting.
the. external. keyboard. in. any. menu.. All. previously.
Functione
Select.menu.
OK.(enter).
Escape.(one.menu.up).
Whitespace.
Backspace.(for.correction).
Select.special.characters.
Delete.booking.of.code
to.be.associated.
0
entered data will remain valid. See "Programming
parameters"..
PROGRAMMING VIA LOCAL KEYPAD
Programming mode can be accessed in two ways.
• The configuration access password is known.
(the default password is "9999"): enter "00"
followed by the 4-digit password and press A. The
following message will appear if the password is
wrong:
Password entry will be jammed for a time which
increases with the number of failed attempts after
the.third.attempt..
• The password is not known:.open.the.removable.
front. and. press. the. programming. button.. The.
programming. button. can. be. pressed. in. any.
programming. menu.. The. data. entered. to. this. time.
will be valid. Press .for.three.seconds.to.go.back.
to.the.previous.menu..
. Press. .for.three.seconds.in.the.main.menu.to.quit.
programming.. Normal. operation. is. automatically.
restored. if. no. buttons. are. pressed. for. over. three.
minutes..
PROGRAMMING PARAMETERS
Refer. to. the. local. keypad. programming. method. for.
programming.menu.operative.descriptions.
The following table shows the operative differences
for.programming.via.keyboard.103/65.
Programming via
local keypad
Buttons. .and. .
Button. .
Button. .pressed.for.3s.
Separate.characters.
Separate.characters.
Separate.characters.
Button. .
INCORRECT
PASSWORD
Programming via
external keyboard
Buttons.←.and.→
Button.↵
Button.
Button.SP
Button.BS
Button./
Button.BS
DS107-035