7.1.2 Description of the menus
ICON
FUNCTION
Power
Fan
*(where featured)
Temperature
Fuel
Timer
ICON
FUNCTION
Setup
[30]
[40]
Submenus
and
7.2 USING THE CONTROL PANEL
The arrow buttons
When selecting a given function, simply press the
buttons.
Pressing the
The "cancel" button
alarm or error codes.
44
USE AND MAINTENANCE
Stove output setting
It allows you to set the fan speed.
Displays the room temperature reading and is used to set the desired
temperature.
[FULL]
pellet hopper
, or deactivates the warning
Enables or disables the timer. When enabled, the icon
SUBMENU
Assigns the programs (max 3) to the different days of the
[1]
Weekly timer
week
[2]
Programs
Program setting menu
[3]
Time / date
Time and date setting
Displays the number of hours remaining until recommended
[4]
Hours remaining
maintenance. When "Hi" is displayed, the remaining time
exceeds 999 hours.
System
[5]
Displays the current software version
information
[6]
Function not enabled
Enables or disables Eco Mode, in which the stove
[7]
Eco function
automatically switches off and on based on room temperature
Difference in degrees from room temperature below which
[8]
Restart delta
Frost protection
Minimum temperature below which the stove switches on
[9]
temperature
[10]
Lock keypad
Disables the buttons on the keypad
[11]
Display brightness Sets display brightness
[12]
Display mode
Sets how the data is displayed
[13]
Buzzer volume
Sets the buzzer volume
[14]
Type of pellets
Three different types of pellet can be set
[15]
Function not enabled
[30]
Installer menu
Sets/displays the stove configuration
[40]
Service menu
Menu reserved for the service centre
in the Setup menu are password-protected and reserved for service centre personnel.
are used to scroll between the different menus that are highlighted.
is used to cancel any changes; pressing and holding the button displays any active
DESCRIPTION
[OFF]
DESCRIPTION
button and then modify the values, again using the
cod. 00 477 2290 - 04/2015 - Palazzetti - PN - Italy
VALUES
OFF*,1..5; Auto; Hi
°C
6
FULL - OFF
will be
ON - OFF
OFF; 3 ... 20
buttons.
1..5
°C
.. 51
VALUES
[d1] ... [d7]
[P1] ... [P6]
OFF; Eco
°C
0,5 ... 5,0
°C
OFF; Lo; Hi
OFF; 1 ... 5
OFF; 1 ... 4
OFF; 1 ... 5
1 ... 3
PWD: "54"