Safety Precautions - EVBOX Elvi Manual Del Usuario

safety precautions

Warning: Chance of electric shock.
• Read the supplied documentation carefully to familiarize yourself
with all safety instructions and regulations before using this product.
• This product is designed and tested in accordance with international standards.
• The use of this product is limited to those applications it is designed for.
• Installation, maintenance and repairs of this product are only to be performed
by qualified personnel.
• Incorrect installation or repairs may cause hazardous situations
for the user of this product.
• This product is used in combination with a power source.
• Always switch off power before any maintenance activity.
• This product does not contain any component that can be maintained
by the user.
• Make sure that the product is only used under the correct operating conditions.
• Make sure that the main power is disconnected before storing or
transporting this product.
• Make sure that the power line to this product is installed on a dedicated circuit
breaker on your service panel that is protected by an adequate RCD.
MCB must be in line with the capacity of the charging cable
(3.7, 7.4, 11, 22 kW).
• For RCD, we advise you to use 40A, 30mA type A. Local regulations
may be applicable and vary depending from your region or
country of residence.
The installing party must always ensure that the station is installed according to the
local regulations. In case the Amperage rating of the charge cable lies above the
Amperage rating of the applied protective device (MCB), the installer / user should
change the station settings in the Hey EVBox app or via hey.evbox.com. This will
be signaled by a warning in the app. Installation or modification of the service panel
should always be performed by a qualified electrician.
EVBox is not responsible for any damage that occurs if this product is transported
in a different packaging than the packaging in which the product was originally
supplied. Store this product in a dry environment; the storage temperature must
be between –25°C and +60°C.
EVBox strives to produce products of the highest quality. EVBox products
are fully CE certified and compliant with the essential requirements of
EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU.
More details can be found at evbox.com or in the Installation Manual.
EVBox products are sold with a limited warranty described at
evbox.com/general-terms-conditions.
EN
2