Parts Identification; Preparation; Charging The Shaver - Panasonic ES‑LV6N Manual Del Usuario

Parts identification

A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Smooth rollers
• They help to glide over
the skin more easily.
5 Foil frame release
buttons
6 Power switch
7 Lamp display
a. Used time lamp
b. Battery capacity lamp
c. Shaving sensor lamp
(
)
d. Clean lamp ( )
e. Switch lock lamp (
f. Foil/blade check lamp
( )
g. Charge status lamp
( )
12
8 Appliance socket
9 Outer foil section
: System outer foil release
buttons
; Inner blades
< Trimmer
= Trimmer handle
> Main body rear terminals
B AC adaptor (RE7-87)
? Adaptor
@ Power plug
A Cord
B Appliance plug
Accessories
C Travel case
D Cleaning brush
E Oil
)
F Operating Instructions
G Guarantee Card

Preparation

Charging the shaver

• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
[BB] into the shaver.
2
Plug the adaptor [B?] into a
household outlet.
• Check that the charge status lamp
( ) is glowing.
• Charging is completed after
approx. 1 hour.
3
Disconnect the adaptor after charging is
completed.
Note
You cannot operate the shaver while charging.
While charging
glows.
The number of the battery
capacity lamp will increase
as charging progresses.
2
1
After charging is completed
The battery capacity lamp
and will light up and then
turn off after 5 seconds.