Assemble The Center Frame And Connect To Ridge Frame Corners - Petsafe Universal Roof HKA11-12074 Instrucciones De Armado

Assemble the Center Frame and Connect
Step
3
to Ridge Frame Corners
Gather (Quantity):
Center Tubing
(4) Center Connector Clamps
(2) Large Carriage Bolts
(2) Nuts
(2) Tubing with Two Holes
1. Take two center connector clamps, one
large carriage bolt, one nut and loosely
attach it to the center of the tube so that
the nut will be facing the ground. Attach
the remaining clamps, bolt and nut to the
tube in the opposite direction, again with
the nut facing the ground. Position both
clamps so that they are in the center of the
tube (3A).
2. Take the two straight tubes with holes
and insert one into the open end of each
of clamps so that the holes are facing the
ground. Loosely tighten the clamp.
3. Take this assembly and connect it to the
ridge frame corners built in Step 2. Insert
the center tube of this assembly onto the
swedged tubes from the ridge frame corners.
Let the remaining tubes hang down from
the center (3B).
Kennel with 5 ft. wide panels
Note: Depending on how the Center Brace
Clamps that are assembled in the next step
line up with the center frame assembly, you
may need to switch positions on the center
clamps.
6
3A
3B
1-888-632-4453