Panasonic PBX Manual De Instrucciones página 4

PNQW4391ZA-VB.fm Page 4 Sunday, July 13, 2014 3:51 PM
a) Before performing any wiring or cabling, unplug the product's power cord from
the outlet. After completing all wiring and cabling, plug the power cord back
into the outlet.
b) When laying cables, do not bundle the product's power cord with the power
cords of other devices.
c) Do not place any objects on top of the cables connected to the PBX.
d) When running cables along the floor, use protectors to prevent the cables from
being stepped on.
e) Do not run any cables under carpeting.
• Unplug this unit from the AC outlet if it emits smoke, an abnormal smell or makes
unusual noise. These conditions can cause fire or electric shock. Confirm that
smoke has stopped and contact an authorised Panasonic Factory Service Centre.
• Make sure that the wall that the unit will be attached to is made of concrete, and is
strong enough to support the unit (approx. 30 kg). Do not attach the unit to walls
made from plasterboard or thin plywood. Attaching the unit to areas where there
are strong winds, or where shocks or vibrations are frequent or strong, may lead to
the product falling over.
• Only use the wall-mounting equipment (anchor plugs, screws, metal brackets)
included with the PBX and the wall mounting kit.
• The earthing wire of the AC cable has an effect against external noise and lightning
strikes, but it may not be enough to protect the PBX and to ensure electromagnetic
compatibility. A permanent connection between earth and the earth terminal of the
PBX must be made.
• Proper earthing (connection to earth) is very important to reduce the risk to the user
of electrocution or to protect the PBX from the bad effects of external noise in the
case of a lightning strike.
• Plug the power cord firmly into an AC outlet. Otherwise, it can cause fire or electric
shock.
• Be careful not to drop any components. Dropping components may damage them
or cause an injury.
• Make sure that the AC outlet is properly earthed, then securely connect the 3-pin
AC plug including the earthed pin.
• A lithium battery is used in the main unit. There is a risk of explosion if the battery
is replaced with an incorrect type. Dispose of used batteries according to the
manufacturer's instructions.
For All Telephone Equipment
• The product should be kept free of dust, moisture, high temperature (more than
40 °C) and vibration, and should not be exposed to direct sunlight.
4
CAUTION