koban KDP-DALI 01 Manual De Instrucciones página 99

Button
Switch off load in standby mode
•
Under unlock status, By pressing "
into standby on mode, with detector's LED flashing quickly for
2sec and load on. Then, press it again, detector enters into
standby off mode, with detector's LED keeps on for 2sec.
•
Under standby on mode, load will keep on with standby
illumination (according to STBY% setting) when detector's delay
time has expired. Under standby off mode, load will switch off
when detector's delay time has expired.
•
Under unlocked status, by pressing "
to select desired channel for value setting, then press "
select standby on or off mode. If press "
without selecting channel, both DA1 and DA2 are set
simultaneously.
Set illumination of load in standby mode
•
Under unlock mode, press "
channel for value setting. Then, press corresponding button to
set the desired load on illumination for standby mode of DA1 or
DA2.
•
Users can set the desired load on illumination for standby mode
of DA1 or DA2 through pressing "
www.grupotemper.com
Presence detector for DALi lighting control
Function
" firstly, detector enters
" or "
" or " " firstly to select desired
" button.
KDP-DALI 01
" button firstly
" to
" button directly
Instructions manual | 47