Optional Accessory - koban KDP-DALI 01 Manual De Instrucciones

KDP-DALI 01
Presence detector for DALi lighting control
Problem
Slave 1.
detector can't
enlarge
detection 2.
range
when it's
connected
to master
detector
Nuisance There are heat sources,
triggering highly reflective objects or
any objects which may be
swayed in the wind within
the detection coverage.

Optional accessory

It is strongly recommended to purchase our high quality IR remote controller
RC DALI for easy and safe setting operations on KDP-DALI 01/KDP-DALI 01-C .
Instructions manual |
Possible cause
Master detector and
slave detector are
connected incorrectly.
Master detector has the
incorrect settings, so
that the connected load
can't be switched on.
FIG.14
42
Suggested solution
1. Connect cables referring to the
wiring diagrams (See FIG.5).
2. Adjust the settings of Time &
Lux for switching on the
connected load depending on
detector's triggering in such
condition.
Avoid aiming the detector toward
any heat sources, such as air
conditioners, electric fans, heaters
or any highly reflective
surfaces.Make sure there are no
swaying objects within the
detection coverage.
RC DALI
www.grupotemper.com