Attaching The Cuff To The Monitor; Taking Your Blood Pressure - A&D Medical Life Source UA-851THW Manual Del Usuario

Attaching the Cuff to the Monitor

After installing the batteries, you
must attach the blood pressure
cuff to the monitor. To do so,
insert the Air Connector Plug of
the blood pressure cuff into the
Air Socket of the monitor firmly.
NOTE: Be sure to differentiate the Air
Socket from the AC Adapter Jack.
The Air Connector Plug will only
securely fit into the correct jack.

Taking Your Blood Pressure

Tips for Blood Pressure Monitoring:
• Relax for about 5 minutes before measurement.
• Do not smoke or ingest caffeine at least 30 minutes prior to
measurement.
• Remove constricting clothing and place cuff on bare arm.
• Unless your physician recommends otherwise, use left arm
to measure pressure.
• Do not talk during measurement.
• Do not cross legs and keep your feet flat on floor during
measurement.
Now you are ready. Follow these simple steps:
1. Sit comfortably with your left arm
resting on a flat surface so that the
center of your upper arm is at the same
height as your heart.
All manuals and user guides at all-guides.com
A&D Medical (Toll-Free): 1-888-726-9966 | Page E-6