Assembling The Accessories; Turntable; Grill Rack; Electrical Connection - Caso MCDG 25 Master Manual De Instrucciones

11.6 Assembling the accessories

►
►
►
11.6.1

Turntable

Assemble the Turntable as follows:
•
Insert the turntable so the groove on the underneath side of the
turntable catch in the drive shaft.
11.6.2

Grill rack

•
Insert the grill rack onto the turntable.

11.7 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the
following instructions must be observed for the electrical connection:
•
Before connecting the device, compare the connection data (voltage
and frequency) on the rating plate with those of your electrical network.
This data must agree in order that no damages occur in the device
If in doubt, ask your qualified electrician.
•
The electrical outlet must be protected by a 16A safety cut-out switch.
•
The connection between the device and the electrical network may
employ a 3 meter long (max.) extension cable with a cross-section of
1.5 mm². The use of multiple plugs or gangs is prohibited because of
the danger of fire that is involved with this.
•
Make sure that the power cable is undamaged and has not been
installed under the oven or over hot or sharp surfaces.
•
The electrical safety of the device is only guaranteed if the device is
connected to a properly installed protective conductor system.
Operations using an electrical outlet without a protective conductor are
prohibited. If in doubt, have the house installation checked over by a
qualified electrician.
The manufacturer cannot be made responsible for damages that are
caused by a missing or damaged protective conductor.
caso MCDG 25 Master
Please note
The device can be operated with the turntable or the grill rack.
Use the grill rack only when the grill is in operation.
The turntable can also be used for microwave cooking.
55