Code/Food
Amount
5
1.
1 to
Veggies
Fresh
4 servings
vegetables
2.
1 to
Frozen
4 servings
vegetables
Auto sensor cooking instructions
The Auto Sensor allows you to cook your food automatically by detecting the
amount of gases generated from the food while cooking.
• When cooking food, many kinds of gases are generated.
The Auto Sensor determines the proper time and power level by detecting these
gases from the food, eliminating the need to set the cooking time and power
level.
• When you cover a container with its lid or plastic wrap during Sensor Cooking,
the Auto Sensor will detect the gases generated after the container has been
saturated with steam.
If using cling film or plastic wrap be sure to leave a small opening near the edge
of dish for ventilation or be sure to pierce at several times.
• Shortly before cooking ends, the remaining cooking time will begin its count
down. This will be a good time for you to rotate or stir the food for even cooking
if it is necessary.
• Before auto sensor cooking food may be seasoned with herbs, spices or
browning sauces. A word of caution though, salt or sugar may cause burn spots
on food so these ingredients should be added after cooking.
MC11K7035CG_AA_DE68-04387Q-00_EN+MES.indb 21
Instructions
Place the fresh vegetables in a
microwavesafe ceramic, glass, or plastic dish
and add 2-4 tbs. water. Cover with a vented
(1 inch) plastic wrap while cooking and stir
before letting stand. Let the oven cool for at
least 5 minutes before using it again.
Place the frozen vegetables in a
microwavesafe ceramic, glass, or plastic dish
and add 2-4 tbs. water. Cover with a vented
(1 inch) plastic wrap to cook. Stir before letting
stand for 3-5 minutes. Let the oven cool for at
least 5 minutes before using it again.
Utensils & Cover for sensor cooking
• To obtain good cooking results with this function, follow the directions for
selecting appropriate containers and covers in the charts in this book.
• Always use microwave-safe containers and cover them with their lids or with
plastic wrap. When using plastic wrap, turn back one corner to allow steam to
escape at the proper rate.
• Always cover with the lid intended for the utensil being used. If the utensil does
not have its own lid, use plastic wrap.
• Fill containers at least half full.
• Foods that require stirring or rotating should be stirred or turned toward the end
of the Sensor Cook cycle, after the time has started to count down on the display.
Important
• After installing the oven and plugging into an electrical outlet, do not unplug the
power cord. The gas sensor needs time to stabilize in order to cook satisfactorily.
• It is not advisable to use the auto sensor cooking feature on a continuous cooking
operation, i.e. one cooking operation immediately after another.
• Install the oven in a well ventilated location for proper cooling and airflow and to
ensure the sensor will operate accurately.
• To avoid poor results, do not use the Auto sensor when the room ambient
temperature is too high or too low.
• Do not use volatile detergent to clean your oven. Gas resulting from this
detergent may affect the sensor.
• Avoid placing the oven near high moisture or gas emitting appliances, since this
will interfere with the proper performance of the Auto Sensor.
• Always keep the inside of the oven clean. Wipe all spills with a damp cloth. This
oven is designed for household use only.
English 21
3/22/2016 10:59:24 AM