Introduction; Proper Use; Features And Equipment - Parkside PEBS 900 SE Instrucciones De Utilización Y De Seguridad

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
n
Rated idle running speed
0
V ~
Voltage
W
Watts (Effective power)
Belt sander PEBS 900 SE
Introduction
Q
Please make sure you familiarise your-
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical pow-
er tools correctly. To help you do this please read
the accompanying operating instructions.
Keep these instructions in a safe place. If you pass
the device on to anyone else, please ensure that
you also pass on all the documentation.

Proper use

Q
The belt sander is designed for dry sanding of
large surfaces of wood, plastic, metal, plaster and
painted surfaces. The device may only be used for
dry sanding. Always use a sanding belt and grade
of grit suitable for the particular surface you are
sanding. The speed selected should also be appro-
priate for the material. The device is not intended
for commercial use. Any other use or modification
to the device shall be considered as improper use
26 GB/MT
Safety class II
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children away from electrical
power tools!
For indoor use only!
Risk of loss of life by electric shock
from damaged mains lead or mains
plug!
Dispose packaging and appliance in
an environmentally-friendly way!
and could give rise to considerable dangers. The
manufacturer will not accept liability for loss or
damage arising from improper use.

Features and equipment

Q
Belt speed adjuster wheel
1
Locking knob
2
on / oFF switch
3
Toothed belt cover
4
Dust extraction spout
5
Belt adjuster screw
6
Auxiliary handle
7
Ventilation slots
8
Tensioning lever
9
Dust collection box
10
Extraction adapter
11
Fixed mounting kit:
Mounting frame
12
Clamp plates 2 x
13
Screw clamps 2 x
14
Spacer plates 2 x
15
Screw
16