Osd Factory Default Settings; Appendix B; Fcc Radio/Tv Interference Notice - Tripp-Lite B020-008-17 El Manual Del Propietario

9. Appendix A

9.3 oSD Factory Default Settings

The factory default settings are as follows:
Setting
OSD Hotkey
Port ID Display Position
Port ID Display Duration
Port ID Display Mode
Scan Duration
Scan/Skip Mode
Screen Blanker
Logout Timeout
Accessible Ports
Beeper
*Use of the [Scroll Lock] key requires the [Fn] key to be held down.

10. Appendix B

10.1 FCC Radio/TV Interference Notice

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense. The user must use shielded cables and connectors with this product. Any changes or
modifications to this product not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
( Continued )
Default
[Scroll Lock] [Scroll Lock]*
Upper Left Corner
3 Seconds
The Port Number plus the Port Name
5 Seconds
All
0 (Disabled)
0 (Disabled)
F (Full) for all users on all ports
Y (Activated)
27