Activating/Deactivating Auto Answer; Changing The Speaker/Earpiece Volume - Siemens Gigaset C59H Manual Del Usuario

Setting the large font
You can increase the font size of print and
symbols in call lists and in the directory to
improve readability. When using the large
font only one entry instead of multiple
entries can be shown at the same time on
each display and names are shortened
where necessary.
Ï
¢ ¢
v
Display
§Change§
Press display key (³= on).
Setting the color scheme
You can set the display to have a dark or light
background.
Ï
¢ ¢
v
Display
Select Color Scheme 1 or Color Scheme 2
§Select§
and press .
•
Setting the display backlight
Depending on whether or not the handset is
in the charging cradle, you can activate or
deactivate the backlight. If it is deactivated,
the display is permanently dimmed. If the
backlight is deactivated it is switched on by
pressing any key. In this case the pressed key
has no other function.
Ï
¢ ¢
v
Display
The current setting displays.
¤
You can enter data in the following fields:
In Charger
Select On or Off.
Out of Charger
Select On or Off.
Please note
With the On setting, the standby time
of the handset can be significantly
reduced.
§Save§
Press the display key.
¢
Large Font
¢
Color Schemes
¢
Backlight
•
Activating/deactivating
auto answer
If you activate this function you can answer
an incoming call simply by lifting the hand-
set out of the charging cradle without hav-
ing to press the talk key c.
Ï
¢ ¢
v
Telephony
§Change§
Press the display key (³= on).
Changing the speaker/
earpiece volume
You can set the speaker volume for speaker
mode and the earpiece volume to five differ-
ent levels.
In idle status:
t
Open the Handset Volume
menu.
r
Set the earpiece volume.
s
Scroll to the Speaker: line.
r
Set the speaker volume.
§Save§
Press the display key if neces-
sary to save the setting perma-
nently.
To set the volume during a call:
t
Press the control key.
r
Select volume.
The setting will automatically be saved after
approximately 3 seconds, if not then press
§Save§
the display key .
If t is assigned a different function:
§Options§
Open the menu.
Volume Select and press
Configure the setting (see above).
Setting the handset
¢
Auto Answer
§OK§
.
39