Auto Fusion And Estimating Loss - Promax PROLITE-40 Manual De Instrucciones

4.3.4 Auto fusion and estimating loss.

The steps of auto-fusion are as follows:
1.- Check and confirm the right option of "FUSION FIBER".
2.- Consult 4.2.4 and make the end-surface of fiber.
3.- Open the windshield and fiber holder to load fiber.
4.- Close the windshield, then press
clean fibers automatically, check end-surface, setup gap, adjust fiber's core, arc
splice, estimate loss and display loss on screen.
5.- When the estimated value of the losses of the melting point is shown on the
screen, please press the button
the X axis and Y axis.
NOTE:
1. Please do not press
auto splice, otherwise will have error.
2. Fusion splicer will estimate loss one time only after splicing automatically.
3. Only the electrode is well, arc parameter is optimised, fiber character is
identical, then fusion loss is of reference.
4. Best to arc test before splicing.
Page 14
PROLITE-40 begin to work automatically:
Figure 7.-
. Then the screen displays large images of
after you press
USER'S MANUAL. PROLITE-40
and when machine in status of
02-2011