Before Operation - Maruyama BL9000-GT Manual Del Proprietário

Be sure the Backpack blower is correctly assembled and all fasteners and fittings are properly secured.
THROTTLE LEVER
STANDARD type
Before operating the Backpack blower, release the
knob, adjust the throttle grip to a position and grip to suit
personal preference, tighten knob to secure in place.
KNOB
THROTTLE LEVER POSITION
When the Backpack blower is strapped to the back of the operator, the throttle lever of is located on the tube.
CAUTION!
1.Shutting Engine Off
Before shutting the engine off, allow it to idle for a short while.
• Never stop the engine by closing the choke.
• Never stop the engine during operation while running above idle speed.
2.Transporting and Storage
• Shut off the engine and allow it to cool before transporting or storing the unit.
• Do not put the unit on dry grass or near any flammable object unless the engine is cold or cooled down.
STANDARD type
IDLE HIGH
The highest position of lever is "IDLE" setting, and the
lowest position is the "FULL THROTTLE" setting.
RECOMMENDED FUEL TYPE
Use clean, fresh lead-free gasoline, including oxygenated or reformulated gasoline, with an octane rating of 85 or higher. To ensure
freshness, purchase only the quantity of gasoline that can be used in 30 days. Use of lead-free gasoline results in fewer combustion
chamber deposits and longer spark plug life. Use of premium grade fuel is not necessary or recommended.
CAUTION!
IMPORTANT:
Never use methanol, gasoline containing methanol, gasohol containing more than 10% ethanol, premium
gasoline, or white gas because engine fuel system damage could result.
Do not use fuel additives other than those manufactured for fuel stabilization during storage such as MARUYAMA's
stabilizer/conditioner or a similar product.
MARUYAMA's stabilizer/conditioner is a petroleum distillate based conditioner/stabilizer.

BEFORE OPERATION

THROTTLE LEVER
GRIP ANGLE
LEVER
IDLE SPEED
FULL THROTTLE
STOP BUTTON
English-7
HA type
Before operating the power blower, release the BOLT,
rotate the throttle arm to the position in the illustration,
and tighten BOLT to secure in place.
STOP BUTTON
THROTTLE
LEVER
HA type
FULL THROTTLE
IDLE SPEED
The lowest position of lever is "IDLE" setting, and the
highest position is the "FULL THROTTLE" setting.
BOLT
THROTTLE
ARM