Starting Procedure - Maruyama BL9000-GT Manual Del Proprietário

STARTING PROCEDURE

STEP #1)
Pump the "PRIMER BULB" under of the carburetor until
fuel can be seen flowing through the "FUEL-RETURN
LINE".
PRIMER
BULB
FUEL
RETURN LINE
STEP #3)
Set the THROTTLE LEVER at 1/2 speed.
STANDARD type
STEP #4)
Press down the "AIR FILTER COVER" and hold the
"FRAME" with your right foot gently.
Pull the "STARTER GRIP" briskly to start the engine.
NOTE: Only short pulls are necessary. Never pull the
starter cord to its fullest extension. Never let go of the
starter grip until it is at the fully returned position.
STARTER
GRIP
If a MARUYAMA engine fails to start after following the above procedures, contact an authorized MARUYAMA dealer.
OPERATING INSTRUCTIONS
LEVER
IDLE SPEED
FULL THROTTLE
FRAME
STEP #2)
Move the "CHOKE LEVER" fully upward to the closed
position. If the engine is already warm, only a partial or open
(no choke) choke setting may be required.
CLOSE
OPEN
HA type
FULL THROTTLE
IDLE SPEED
STEP #5)
Warming up the engine.
When the engine has started, slowly move the
"CHOKE LEVER" fully downward to the open position.
Allow the engine to "WARM-UP" at less than 1/2
speed.
CHOKE
LEVER
OPEN
English-9
CHOKE
LEVER