Safety Instructions; Safety Symbols; Symbol Meaning; General Power Tool Safety Warnings - EGO POWER+ HT2400E Manual De Instrucciones

READ ALL INSTRUCTIONS!
EN
READ & UNDERSTAND
INSTRUCTION MANUAL
Residual risk!
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the explana-
tions with them deserve your careful attention and
understanding. The symbol warnings do not, by them-
selves, eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL:
WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any power tools can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields.
4
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400E
People with electronic devices, such
Indicates DANGER,

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
Safety Alert
Read The Opera-
tor's Manual
Do Not Expose To
Rain
Blade Length
61cm
Ø22 mm
Cutting Capacity
V Volt
A Amperes
Hz Hertz
W Watt
min Minutes
Alternating Current Type of current
Direct Current
n No Load Speed
0
... /min Per Minute
SPM Strokes Per Minute Stroke speed, at no load

GENERAL POWER TOOL SAFETY WARNINGS

WARNING:
Read all safety warnings and
instructions. Fail to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Indicates a potential
personal injury hazard.
To reduce the risk of
injury, user must read
operator's manual.
WARNING: Do not use in
the rain or leave outdoors
while it is raining.
The length of the blade
Max. Cutting capacity of
the blade
Voltage
Current
Frequency
(cycles per second)
Power
Time
Type or a characteristic
of current
Rotational speed, at no
load
Revolutions per minute