7
MAINTENANCE
RECOMMENDATION
In order to maintain the durability of your treadmill, it is important to follow a series of precautionary steps to avoid any type of problem
in the treadmill or users and/or third parties. If any part of the equipment is broken, put it out of use until the part that has been damaged
is repaired.
CLEANING
On a weekly basis, clean the equipment using a soft, nylon brush. Vacuum up any dust that has accumulated under the equip-
ments which may affect the functioning of the equipment.
Always use water, soap and a damp cloth to clean the padded handrail and the equipment before and after the training.Wait for
the machine to dry completely to start a new workout. Never use acidic cleaning products. Never pour water into the equipment or
apply liquid spray.
UPHOLSTERED
Any type of tear, holes or other damage will cause immediate replacement. For greater
upholstery durability, clean as described in this manual.
SHROUD
The shroud serves as a protection of the tower, in case it is damaged do the immediate
eplacement.
COUNTER
If the counter is not working check your batteries. To do this, simply remove the top fairing and
replace the batteries that came with the equipment. If this is not the case contact a service
center. To enter the counter maintenance mode, a magnet must be brought close to the counter
and it will enter maintenance mode. The counter will display version,% of battery from 0 to 100
and the total of repetitions, the information will be shown automatically. To enter the counter
maintenance mode can not be in stand by and should have the batteries charged. To remove the
counter from the stand by, a repetition must be performed.
HOWTO CHANGE BATTERIES
Follow the steps below to replace the batteries.
1-Remove the front
shroud of the
equipment.
2-Remove the rear
shroud of the
equipment.
45
3-Remove the
4-Finally insert the new
upper
shroud/trinket box
reassemble the top
of the equipment.
shroud and the other
2x Type battery D
batteries and
shroud