Important; Maintenance Table - Movement EDGE Manual De Montagem

ATTENTION
SAFETY AND MAINTENANCE OF
STEEL CABLES

IMPORTANT

The cables are the worn items. It is
your responsibility to avoid the
unexpected rupture of the cables.
The inspection of cables must be
performed daily.
Inspect all of the cables in
particular the nylon coating on all
of the cables, and in the areas near
the attachments at each cable end.
SREPLACE ANY DAMAGED OR
WORN CABLES IMMEDIATELY
Do not allow the equipment to be
used until the damaged or worn
cables are replaced. By using or
allowing a machine to be used
with a suspected faulty cable may
result in severe injuries.
See guide for more information.
ATTENTION!
On the tower of each
piece of EDGE line
equipment, you will find
information relating to
the SAFETY AND
MAINTENANCE OF THE
STEEL CABLES.
Check the items cited
DAILY for user safety.
MAINTENANCE
TABLE
Check the operation and the
integrity of the following
components. Inspect the
equipment according to this
table. Replace all damaged,
broken or worn components
immediately.
CABLES
Check the tension, finishing,
and coating.
Check if the fastening nuts on the pile
of weights is tightened.
UPHOLSTERED/SEATS
Clean and dry
Sanitize
STRUCTURE:
Clean and dry
Polish/Wax
NUTS/ BOLTS/
TIGHTENING:
Tighten and/or necessary adjustments
WEIGHT GUIDES
Lubricate and clean
SEAT:
Clean and sanitize
ADJUSTMENTS/ LOCK PIN
WEIGHTS LOCK PIN
WARNING STICKERS
HANDLE/ BEARINGS
FOR MORE INFORMATION READ THE
PRODUCT INSTRUCTION GUIDE.
8
INSTRUCTIONS

MAINTENANCE TABLE

On the tower of each
piece of EDGE line
equipment, you will find
a TABLE OF SAFETY
MAINTENANCE AND
MAINTENANCE OF THE
STEEL CABLES
The table suggests
checking various items of
the equipment, as well as
the frequency of checks.