Installing Batteries - HoMedics BPA-201 Manual De Instrucciones

INSTALLING BATTERIES

1. Press down on latch and lift
the battery cover to open the
battery compartment.
2. Install or replace 4 "AA "
sized alkaline batteries in
the battery compartment
according to the indications
inside the compartment.
3. Close the battery cover by
pushing in the top end of
the battery door.
Replace the batteries if:
• The weak battery symbol appears on the display.
• Nothing appears on the display when the power is switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores. Replace all
batteries at one time (as simultaneous set). Use only 1.5V "AA "
alkaline batteries. Remove batteries when unit is not in use for
extended periods of time. Date and time will need to be reset
if batteries are removed or replaced. Clean contacts on battery
and in battery compartment with a soft dry cloth each time you
install batteries.
Note:
Batteries are hazardous waste. Do not dispose of them together
with the household garbage.
11
Battery
Cover
Slide-Out
Tray