Tabla de contenido
Idiomas disponibles
Idiomas disponibles
iROB Pulse
• Rinse work-pieces that have been degreased with chlorinated solvents with clear water. Otherwise there
is a risk of phosgene gas formation. For the same reason, no degreasing baths containing chlorine must
be placed in the vicinity of the welding area.
• Adhere to the general fire protection regulations and remove flammable materials from the surroundings
of the welding work area, prior to starting work. Keep appropriate fire extinguishing equipment ready
at the workplace.
2.6 Warning and information signs
Following warning and information signs are located on the product:
Symbol
These markings must always be legible. They may not be covered, obscured, painted over or removed.
2.7 Emergency information
In case of emergency, immediately interrupt the following supplies:
• Electricity
• Compressed air
• Gas
Further measures can be found in the "Power source" operating instructions or in the documentation of further
peripheral devices.
BAL.0323.0 • 2017-08-31
Meaning
Read and observe operating instructions!
2 Safety
EN - 5
Capítulos
Tabla de contenido
