Battery Charger; Structure And Functions; Machine; Battery - Lavor COMFORT XXS A12 RIDER KRON PICO Manual De Instrucciones

Tabla de contenido
• It should not be taken for granted that batter-
ies and battery chargers with the same technical
features as those we offer will produce the same
results. Only perfect compatibility between these
elements (Pb-Acid batteries, gel batteries and bat-
tery chargers) will safeguard the performances,
the service life, the safety and the economic value
invested.
5.1.2

BATTERY CHARGER

This type of high-frequency battery charger effi-
ciently charges batteries, extending their operating
and service life. In addition, because they can be
configured, it is a very versatile solution; the same
battery charger can be used for both Pb-Acid bat-
teries and for gel batteries.
• It should not be taken for granted that batter-
ies and battery chargers with the same technical
features as those we offer will produce the same
results. Only perfect compatibility between these
elements (Pb-Acid batteries, gel batteries and bat-
tery chargers) will safeguard the performances,
the service life, the safety and the economic value
invested.
5.2

STRUCTURE AND FUNCTIONS

5.2.1

MACHINE

Photo A
1
Recovery tank
2
Operator's seat
3
Solution tank
4
Rear wheel
5
Bumper wheel
6
Splash guard
7
Traction control pedal
8
Squeegee lifting/lowering lever
9
Steering wheel
Photo B
1
Recovery water tank drain hose
2
Recovery water tank drain hose plug
3
Solution water tank filling plug
4
Suction hose
5
Suction hood and access to the
recovery tank
Photo C
1
Blinker
2
Suction hood
3
Suction filter
4
Recovery tank
Photo D
1
Solution water tank drain plug
Photo E
1
Squeegee bumper wheels
2
Squeegee blades replacement knobs
3
Squeegee fast fixing knob
4
Squeegee inclination adjusting knob
5
Suction hose
6
Squeegee pressure fixing knobs
7
Squeegee wheels
Photo F
1
Solution water filter
Photo G
1
Battery compartment with 6V batteries
2
On- board battery charger
3
Battery charger plug
4
Battery connection diagram
Photo H
1
Detergent solution ouflow adjusting lever
2
Battery security connector
2
Brush plate lifting/lowering lever
Photo I
1
Battery charger cover
2
Red LED - Battery discharged
3
Green LED - Full charged battery
4
Dip-Switches
5
Plastic cap to access the Dip-Switches
6
Dip-Switches for PB-Acid/GEL battery
setting
7
Table with Dip-Switch settings for
PB-Acid/GEL charging curve
Photo L
1
Unblocking lever of the electromechani-
cal brake in working position
(brake applied)
2
Unlocked position of the
electromechanical brake
Photo M
1
Steering wheel
2
Control panel with display
3
General ON/OFF key switch
4
Detergent tank
Photo N
1
Brush motor operating push button
2
Suction motor operating push button
3
Detergent outflow adjusting push button
4
Forward/reverse traction push button
selector
5
Traction speed increase push button
6
Traction speed reduce push button
7
Operating informations display
Photo O
Percentage of dilution of the detergent
1
Dilution with half outflow of clean water
2
Dilution with complete outflow of clean
water
5.2.2

BATTERY

If supplied, the Pb-Acid (if not dry charged) or gel
31
Tabla de contenido
loading

Tabla de contenido