Emergency Operation Of Support Legs - AL-KO UP4 Manual De Instrucciones

en
Terminate manual adjustment
Deactivate the AL-KO support system after use:
3. Push slider switch (2G) on the remote control to "OFF" (0).
Green LED (2I) on the remote control goes out.
4. Store the remote control in a safe place (out of the reach of children or unauthorised persons).
5. Turn off battery disconnection switch (1).
WARNING!
Risk of accidents!
Before starting the journey, check that each individual support leg is fully raised!

Emergency operation of support legs

In the event that the caravan battery is too flat to allow the support legs to be raised, or if there is a defect,
the support legs can be actuated manually.
1. Pull the plastic cap off the support leg spindle.
2. Push the original crank with the 19 mm hex drive and adapter onto the support leg spindle (8).
3. Turn the support leg spindle until the support leg is fully raised for transport or is fully lowered and
stable.
CAUTION!
Damage to the drive or control unit possible!
Turn the spindle manually no faster than 1 revolution per second!
Do not use a cordless screwdriver or other driven tools to turn the spindle!
4. Repeat the procedure on all support legs.
ADVICE
As soon as the battery has been charged or the problem has been resolved, the driven spindle
will function again.
5. After completing the emergency operation, push the plastic cap onto the support leg spindle again.
36
1659595_a BA UP4 El_Caravanstütze ESS1 DIN A5 sw.pdf 36
1659595_a
08.11.2017 11:19:34