Modifiers; Laundry Guide - KENMORE ELITE HE 3 Plus 110.4580 Serie Manual Del Propietário

Preset cycle settings of Wash/Rinse Temp, Spin Speed, and Soil
Level can be changed. You can change a modifier after starting a
cycle anytime before the selected modifier begins. Not all
Modifiers are available with all options and cycles.
MODIFIERS
Auto [FMr_ COS_TRO! e HIGH
o HOT / COLD O MEDIUM
O WARM / WARM • LOW
O WARM / COLD ®EXTRA LOW
0 COLD / COLD oNo SPiN
(2) C)
WATER TEMP SPiN SPEED
WASH i RINSE
0 2ND RINSE
• NORMAL RINSE
RINSE
OPTIONS
To change the water temperature, select the WATER TEMP
button until the desired setting glows.
To change the spin speed, select the SPIN SPEED button
until the desired setting glows.
• HEAVY
• NORMAL
• LIGHT
SOIL LEVEL
• To change cycle time, select SOIL LEVEL button.
Normal Rinse
This consists of a two phase rinsing process that is effective for
everyday laundry.
2nd Rinse
A second rinse can be used to aid in the removal of detergent or
bleach residue from garments. This option provides an additional
rinse with the same water temperature as the first rinse. This is
the default rinse setting for the Whitest Whites cycle.
Wash/Rinse Temp
Select a water temperature
based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
Warm rinses leave the loads drier than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.
Temperature Guide
Wash Water Temperature Suggested Fabrics
HOT Whites and pastels
Heavy soils
WARM Bright colors
Moderate to light soils
COLD Colors that bleed or fade
Light soils
In wash water temperatures colder than 60°F (15.6°C), detergents
do not dissolve well. Soils may be difficult to remove.
Auto Temp Control
ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water. The ATC is automatically turned On when a cycle is
selected. See "Preset Cycle Settings" in "Cycles."
• ATC ensures consistent cleaning.
• ATC works for the wash temperature with Hot/Cold, Warm/
Warm, Warm/Cold, and Cold/Cold settings.
• ATC works for the Warm rinse setting by regulating the water
temperature at approximately 104°F (40°C).
• The Cold rinse temperatures depend on the cold water at
your faucet.
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available within each of
these washer cycles.
CYCLE SUGGESTED LOAD TYPE PREWASH RINSE EXTENDED SPIN
OPTIONS
Whitest Whites Soiled white fabrics v' v' v'
Heavy Duty Heavily soiled underwear, towels, shirts, etc., made of v' v' v'
cotton
Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of v' v' v'
polyester, nylon, cotton, linen, or cotton blends
Delicate/Nandwash Fabrics made of silk, special-care items marked as v'
"Handwashable"
Express Wash Small loads of 2-3 lightly-soiled cotton, polyester, v' v'
nylon and cotton blends.
17