How To Use - HJM VT560 Instrucciones De Uso

Ventilador Torre VT560_Maquetación 1 16/11/17 18:32 Página 17
- Position the power cord into its slot: remove the 2 screws from the
cable clamp placed at the bottom of the rear base; then remove the
cable clamp. Position the power cord into its slot and reposition the
cable clamp and securely reinsert the 2 screws.
Pay attention that all the parts are correct and firmly connected with
each other.
Caution! Connect to the mains supply only after the fan has been
fully assembled.
- The fan must not be used without a fixed base
- The device may be operated only in straight and upright position
- This device may not be used in a horizontal position.

HOW TO USE

Place the fan on a dry and stable surface and insert the plug on the
ning their pegs/peg holes and fix it on the
bottom of the fan by using the 3 screws
provided.
Cable clamp and its screw
Cable's slot
- 17 -
Cable
E
N
G
L
I
S
H