Rohde & Schwarz ENV216 Manual Del Usuario página 80

www.allice.de
R&S ENV216
Operating Manual 5201.6693.14 - 03.00
3 RF OUTPUT
RF OUTPUT
4 ARTIFICIAL HAND
ARTIFICIAL HAND
Allice Messtechnik GmbH
The "RF OUTPUT" socket is the RFI
voltage measurement output for connec-
ting the test receiver. The RFI voltage
spectrum of the selected path is attenu-
ated at the "RF OUTPUT" by 10 dB. The
10-dB-attenuator and a transient
suppressor are permanently inserted. A
150-kHz-highpass filter can additionally
be switched into the path either manually
or by remote control. The socket is an
"N" type.
The output impedance is 50 Ω.
The "ARTIFICIAL HAND" enables the
effects of the human hand to be
simulated. Metal housing parts of the
equipment under test that are usually
touched with the hand can be connected
to this jack. The hand simulation consists
of connection in series of a 510-Ω-
resistor and a 220-pF-capacitor. The
jack is a 4-mm-terminal clamp.
Operation
21