Sample Measurement - Rohde & Schwarz ENV216 Manual Del Usuario

www.allice.de
R&S ENV216

3.10 Sample measurement

Operating Manual 5201.6693.14 - 03.00
The figure shows the measurement setup for measuring the RFI voltage of a handheld
drill. In this example, the handheld drill is connected to three metal foils.
Item Description
1 Metal wall, at least 2 m x 2 m
2 Equipment under test
3 Connection cable
4 Connection cable running separately to the hand simulation
5 Two-Line V-Network
6 Metallic collar capable being gripped
7 Test receiver
A Power supply connection
B Reference ground connection, low-inductance (e.g. brass plate, 0.2 m)
P Test device connector
H Artificial Hand connector
M Test receiver connector
D Metal foils
Allice Messtechnik GmbH
Preparation
17