Connecting The Equipment Under Test; Connecting The Test Receiver - Rohde & Schwarz ENV216 Manual Del Usuario

www.allice.de
R&S ENV216

3.7 Connecting the equipment under test

3.8 Connecting the test receiver

Operating Manual 5201.6693.14 - 03.00
The equipment under test is connected via the socket (1) on the front of the
R&S ENV216. Constant current must not exceed 16 A. For ambient temperatures
>35°C, external air ventilation is recommended.
The RFI voltage measurement plane is located on the front panel of the R&S ENV216.
The impedance gradient of connections N and L1 of the socket is measured against
the reference ground connectors (4-mm-jacks) to the left and right (2) of the socket (1).
The test receiver is connected to the N connector RF OUTPUT (1) by a 50-Ω-coaxial
cable.
Allice Messtechnik GmbH
Preparation
14