Rohde & Schwarz ENV216 Manual Del Usuario página 62

www.allice.de
R&S ENV216
Operating Manual 5201.6693.14 - 03.00
Improper or negligent handling could result in death!
Before using for the first time, the network must be connected to an additional
conductor that is compliant with VDE0100 part 540 item 5 (IEC 60364-5-54).
Users must be aware that it is possible for socket connections and grounding
conductors to become disconnected. A further grounding conductor with adequate
cross-section must be connected between a grounding conductor connection for the
measurement area and the grounding conductor connection (grounding bolt) on the
back panel of the R&S ENV216.
Only then may the network be connected to the mains power supply.
At shutdown, the same procedure must be followed in the reverse order:
First the network must be disconnected from the mains power supply, and only then
should the additional grounding conductor connection be removed.
Allice Messtechnik GmbH
Safety directions
3