Customizing The Status List - Christie LX1750 Manual De Instrucciones

Customizing the status list

Changing the status column indication
1
Select Column selection from System menu. The col-
umn selection window will appear.
2
On the window, check the column name to be indi-
cated on the status list.
0 The mark [*] next to the column name indicates an alert
item.
3
To change the order of the display column on the
status list, select a column you intend to change the
order and click To up or To down.
4
Click OK to close setting.
0 When specifying the column width by numeric value, enter
number (0 to 9999) onto "Column width" text box.
Column
*Target name ............................Name of the network equipment
*Group ...........................................Group name
*Connect ......................................Status of connection to the network (Connected, Un-connected)
*Drive time .................................Accumulated use time of the equipment
*Power status ............................ Power status of the equipment (Normal(Power-on), Normal(Standby), Power
*Input status ..............................Input signal status (Signal, No signal, Signal interrupted)
*Inside Temperature
A status ....................................Status of inside temperature A (Normal, Warning, Error)
*Inside Temperature
B status ....................................Status of inside temperature B (Normal, Warning, Error)
*Inside Temperature
C status ....................................Status of inside temperature C (Normal, Error)
*External Temperature
status.........................................Status of external temperature (Normal, Warning, Error)
*Lamp1 status ..........................Status of Lamp1 (Off, On, Error, Replace)
*Lamp2 status ..........................Status of Lamp2 (Off, On, Error, Replace)
*Lamp3 status ..........................Status of Lamp3 (Off, On, Error, Replace)
*Lamp4 status ..........................Status of Lamp4 (Off, On, Error, Replace)
*Lamp1 time..............................Used time of Lamp1
*Lamp2 time..............................Used time of Lamp2
*Lamp3 time..............................Used time of Lamp3
*Lamp4 time..............................Used time of Lamp4
*Filter status ...............................Status of airfilter (Normal, Clogged)
*Option Box
filter status ............................Status of option box filter (Normal, Error, Clogged)
*Filter time ..................................Use time of airfilter
*Option Box
filter time ................................Use time of option box filter
0 The values in parentheses are typical value and they differ depending on the connected equipment.
0 The [*] next to the column name indicates alert items.
PJ Network Manager for Windows
020-000640-01 Rev.1 (11-2013)
Description
Management, Power failure, lamp failure, etc.)
Customizing the status list
Specifies col-
umn width
19