Setting The Password Of Telnet; Setting Commands Batch Processing For Multiple Targets - Christie LX1750 Manual De Instrucciones

Setting the password of Telnet

The telnet password can be set by the procedure below. It is necessary to make the pass-
word the same as the network password.
1
Select a target which you want to set as the telnet password from the status list. You can
select multiple targets.
2
Select Telnet setting from the Target menu. The Telnet setting dialog appears as shown
below. Set a password and click OK. When multiple targets are selected, all the selected
targets are set as the same password.

Setting commands batch processing for multiple targets

The commands for batch processing of multiple targets can be set following the proce-
dure below.
1
Select a target belonging to the batch processing group which you want to set, and
select Commands batch processing from Target menu. Commands batch processing
dialog box will appear as shown below.
2
Select a command which you want to set, and click Edit. Parameter editing dialog box
will appear. Select a parameter, and then click OK. The check box of Commands batch
processing dialog box will be checked.
3
Click OK. The commands are carried out to all the targets of the same group.
The commands also work for the target which is not set to a group.
0
PJ Network Manager for Windows
020-000640-01 Rev.1 (11-2013)
Setting up the password of Telnet
0 The initial setting is "0000".
15