EdilKamin CALGARY Instalación Uso Y Mantenimiento página 36

A
fi g. 1
A
fi g. 2
B
fi g. 3
B
fi g. 4
C
fi g. 5
INSTRUCTIONS FOR USE
- 36
PELLET LOADING VIA PNEUMATIC FEED SYSTEM
(optional)
The boiler is preset for pellet loading via a pneumatic feed
system.
For installation proceed as follows:
NOTE:
before proceeding turn off the boiler and disconnect the
electrical power cable
Fig. 1-2:
Remove the sheet metal lid (A) by unscrewing the two screws.
Fig. 3:
Remove the galvanised rear closure profi le (B) by loosening
the two screws.
Fig. 4:
Turn the profi le (B) over and reassemble it upside down in the
same position using the previously removed screws.
Fig. 5:
Secure the boiler to the external extraction and suction unit
(C) using the screws removed during lid disassembly.
-