Opening And Closing The Disc Holder And Loading A Disc; Normal Cd Playback - Denon DCD-485 Instrucciones De Operación

ENGLISH
OPENING AND CLOSING THE DISC HOLDER
AND LOADING A DISC
Opening and closing the disc holder (This operation only works
while the power is on.)
1. Push the POWER switch to turn on the power.
5
2. Push the OPEN/CLOSE button.
How to load a disc
• Make sure the disc holder is completely open.
• Hold the disc by the edges and place it on the disc tray. (Do not
touch the signal surface, i.e., the glossy side.)
• When using 12 cm. diameter discs, make sure the outer edge
matches the tray guide circumference (Fig. 1) and when using CD
singles (8 cm. diameter) match the outer edge with the inner tray
guide circumference. (Fig. 2)
5
• Push the OPEN/CLOSE button to close the disc holder.
• When the disc holder is closed, the disc is read and after a few
seconds the number of tracks and total playing time are displayed
on the TRACK No. and TIME displays, respectively.
• When the disc holder is open and a disc is loaded, you may also
1
push the PLAY or
1
the PLAY button is pushed, playback will start immediately
upon the disc contents having been read.)
Fig. 1
Fig. 2
Caution:
• If your finger should get caught in the disc holder when it closes,
5
push the OPEN/CLOSE button.
• Do not place any foreign objects on the disc tray and do not place
more than one disc on the tray at a time. Otherwise malfunction
may occur.
• Do not push in the disc tray manually when the power is off as this
may cause malfunction and damage the CD player.
• This player can play CD-R/RW discs, but only if they are finalized.
Note however that depending on the recording quality, the player
may not be able to play some finalized CD-R/RW discs. If a
problem occurs with such discs (for example if the disc cannot be
read when it is loaded or when the play mode is set), "
appears on the time display section when the disc is unloaded.
8
3
PAUSE button to close the disc holder. (If
Tray guide for 12 cm disc
B
12 cm disc
Tray guide for
8 cm disc
B
8 cm disc
(CD single)

NORMAL CD PLAYBACK

(1) Starting Playback
B
P M UD O TEC NOL GY COMP CT D SC P AY R DCD 685
CD Rewr tab e Play ack
POWER PHON S HONES LE EL
£
ON OFF
I AX
1. Push the POWER switch to turn on the power.
2. Load the disc you want to play.
• When the disc holder is closed, the disc is read and the number of
tracks and total playing time of the disc are displayed.
1
3. Push the PLAY button.
• The number of the track currently playing and the elapsed time,
etc. displayed.
• Playback can also be started by pushing the jog dial.
(2) Stopping Playback
B
DCD 685
P M UD O TEC NOL GY COMP CT D SC P AY R
CD Rewr tab e Play ack
POWER PHON S HONES LE EL
ON £ OFF
IN MAX
2
1. Push the STOP button.
• When all tracks have been played on a disc, playback will stop by
itself.
Precautions:
• If no disc has been loaded or the disc has been placed upside
down, the track number and time display will all read zero and the
entire calendar will light.
• When the information on the disc cannot be read correctly, for
example due to dust or dirt on the disc, the track number and time
display will all read Zero and the entire calendar will light. And the
number of tracks, remaining time per track will not be displayed.
Also, the search operation may take longer than usual.
No disc or Improper display
"
PEN CL SE PL Y S OP
AU E ANDOM D S LAY T ME
R MO E S N OR
A DIT A SPACE
RE EA
A L B
( 1PLAY )
PEN CL SE PL Y S OP
AU E M D S LAY T ME
R MO E S N OR
IT A SPACE
A
A B
( 2 STOP )
1 2 3 4 5
6 7 8 9 10
M S
11 2 3 14 15
6 17 8 19 20