Opening And Closing The Drawer And Loading A Disc - Denon DCM-380 Instrucciones De Operación

ENGLISH

OPENING AND CLOSING THE DRAWER AND LOADING A DISC

6
Opening and closing the drawer (This operation only works while
the power is on.)
1. Press the POWER switch to turn on the power.
2. Press the 5 OPEN/CLOSE button.
How to load a disc
• Make sure the drawer is completely open.
• Hold the disc by the edges and place it on the disc tray. (Do not
touch the signal surface, i.e., the glossy side.)
• Set the disc properly in the tray according to its size.
Set 8 cm discs in the center hole.
Set 12 cm discs in the outer hole.
• When the drawer is opened during the stop mode, discs can be
loaded in the 3 disc trays. If the DISC SKIP button is pressed, the
carousel turns and a disc can be loaded in the another disc tray.
When the drawer is opened during the play mode, it is possible to
load and unload discs in all of the disc trays other than the one
whose disc is currently playing. 3 discs can be replaced and press
the DISC SKIP button to switch the other disc tray that can be
replaced.
• Press the 5 OPEN/CLOSE button to close the drawer.
Caution:
• The player will not operate properly and the disc may even be
damaged if it is not set correctly.
• If your finger should get caught in the drawer when it closes, press
the 5 OPEN/CLOSE button.
• Do not place any foreign objects on the disc tray, and do not place
more than one disc on the tray at a time. Otherwise malfunction
may occur.
• Do not push in the disc tray manually when the power is off as this
may cause malfunction and damage the CD player.
• Do not touch the carousel while it is turning. Also, do not turn the
carousel by hand when it is stopped. Doing so could damage it.
• Do not insert disc where indicated by arrow.
This could damage the internal mechanism in the unit.
10
LABEL SIDE
UP WARD