Disc Playback; Playing Discs Or Files; Eject A Disc From This Unit; Example Of Display On The Front Panel Display - Pioneer X-SMC1-K Manual De Instrucciones

05

Disc playback

Chapter 5:
Disc playback

Playing discs or files

1 Press STANDBY/ON to turn the power on.
The selected input is displayed on the front panel display.
• When playing a DVD-Video or DivX discs, turn the TV on
and switch TV input before starting.
• You can change the screen display language of the unit
(OSD Language on page 26).
Press FUNCTION / to select DVD/CD as
2
the input source.
Please wait until the indicator changes from flashing
'
' to '
When a disc has been slotted in the disc slot already, press
 EJECT to eject the disc.
3 Slot a disc.
Playback starts automatically.
• By using the number buttons (0 to 9), you can specify
and play the title, chapter, track or file you want to view/
listen to.
Slot a disc with
the label side
facing front.
• Hold the disc as shown in the illustration, insert it in the
center of the disc slot, and press in gently from above.
• The disc will then be automatically drawn into the slot.
• If the disc does not load smoothly, do not attempt to
force it. Remove it from the slot and try inserting it again.
Attempting to force a disc causes damage or
malfunction.
• Do not touch the recording surface of the disc, since the
disc may not play properly if it has fingerprints or other
soiling.
• 8 cm discs cannot be played. Also do not attempt to use
adapters for 8 cm CD to play such discs, since
malfunction may result.

Eject a disc from this unit

Press  EJECT on the top panel.
•
16
En
'
.
Tip
• When no operation has done in DVD/CD mode for more
than 30 minutes, the power will automatically turn off.
Example of display on the front panel
display
When the power is turned on (On)
When the power is turned off (OFF)
When the disc is being loaded (LOAd)
When the title menu or menu is displayed (titLE)
When the GUI is displayed or operated (GUI)
When the disc is stopped (StOP)
When no disc is loaded