Bluetooth Operation - Trevi XR 8A10 Manual De Usuario

OPERATION MICRO SD CARD/USB MEMORY
1. Insert a Micro SD card into the slot (7) holding the electrical contacts facing upwards, or
insert the USB flash disk in the port (5) to play music;
2. Turn On the speaker;
3. The music will start automatically;
4. Press once the - (2) button to skip to the previous track, press the + button (3) to skip to
the next track;
5. Press (4) button to pause playback, press it again to resume playback.
AUX IN
1. Turn On the speaker and select AUX function;
2. Connect the cable with Micro USB socket to the socket (8) and the other end with 3.5mm
jack to the AUX IN socket of the external device;
3. Start playback from the external device.

BLUETOOTH OPERATION

Pairing devices
1. Slid the button Power On/Off (9) to turn On the device. The LED indicator (6) will turn on
and a sound is heard confirming the speaker is set into Bluetooth pairing mode;
2. Turn on the Bluetooth on your Smartphone or Tablet and start to search for the speaker.
Once "XR8A10" appears on your phone or tablet, click on it to pair your device with the
speaker and enter the PIN "0000" if required. The speaker will emit a sound, confirming
the paring process has been established;
3. Music is ready to play after paired;
4. During the play, press - (2) or + (3) button for previous or next song, keep pressing - (2)
or + (3) button for adjust the volume;
5. Press (4) button once to play/pause the music.
Notes:
- The Bluetooth speaker only works with a connection at a time, the connection can not be
interrupted during normal operation.
- When the Bluetooth pairing with external devices fails, delete another Bluetooth device in
the list of connections, restart the Bluetooth speaker and search for the signal again.
Handfree function for calling
When there is an incoming phone call:
- Short press (4) button to receive the call and the hands free function will commence
automatically. Short press
- Keep press (4) button to reject an incoming call.
- Double press
TWS OPERATION
1. Power on two speakers and the default setting is the Bluetooth mode, the blue LED light
(6) flash (Voice bluetooth mode);
2. Turn off the bluetooth function on your phone or other bluetooth device, long press M
(4) button to stop the calling function.
(4) button for dial back the phone number.