Changing The Broil Orifice, On Gas Ranges Only - Thermador PALPKITHW Manual De Instrucciones

Model 486 with griddle
(1) 105 (3) 105
(2) 126 (4) 115
Model 486 with griddle and grill
(1) 105 (3) 105
(2) 126 (4) 115
Model 606 with grill and griddle
(1) 105 (3) 105
(2) 126 (4) 115
Page. 14
(6) 105
(5) —
(7) 115
(5) —
(6) —
(5) — (7) 105
(6) — (8) 115
Model 606 with griddle
(1) 105 (3) 105
(2) 126 (4) 115
Changing the broil orifice, on
GAS ranges only (PRG models)
9 CAUTION
After the replacement of the broiler orifice, and
before reassembly of the back panel and backguard to
the range, perform a brief gas leakage check of the
orifice and associated fittings, per the "Check for Gas
Leaks" section of these instructions.
Removing the backguard assembly
1. Move the range out of its installed position to gain full
access to the rear panel of the backguard assembly
and to the broil burners' orifices.
2. Use a T-20 torx screwdriver to remove the screws from
the front of the backguard assembly.
(6) 105
(5) —
(7) 115