Section
Audio Adjustments
07
Using non fading output
When the non fading output setting is on, the
audio signal does not pass through this unit's
low pass filter (for the subwoofer), but is output
through the RCA output.
1 Press
AUDIO
on/off mode.
When the subwoofer controller setting is
, you can select non fading output
Control:EXT
on/off mode. Press
appears in the display.
2 Press 5 to turn non fading output on.
appears in the display. non fading
NonFad ON
output is now on.
• You can turn off non fading output by pressing
∞.
Adjusting non fading output level
When the non fading output is on, you can
adjust the level of non fading output.
1 Press
AUDIO
setting mode.
Press
until
AUDIO
play.
2 Press 5 or ∞ to adjust the output level of
the non fading.
Each press of 5 or ∞ increases or decreases
the level of the non fading (e.g.,
Press 5 or ∞ until you see the desired value
displayed.
34
En
to select non fading output
until
AUDIO
NonFad ON
to select non fading output
appears in the dis-
NonFad 0
to
+6
–6
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play from
the front or rear speakers, switch the HPF (high
pass filter) on. Only frequencies higher than
those in the selected range are output from the
front and rear speakers.
1 Press
S.W
Press
AUDIO
2 Press 5 to turn high pass filter on.
HPF 80 Hz
filter is now on.
• To turn high pass filter off, press ∞.
3 Press 2 or 3 to select a high pass filter
range.
Press 2 and
and
125 Hz
than those in the selected range are output
from the front or rear speakers.
Note
• If you switch the
tion is automatically switched off. By switch-
ing the
mode, you can combine
SFEQ
with
SFEQ
).
to select
.
AUDIO
HPF
until
appears in the display.
HPF
appears in the display. High pass
is displayed. Press 3
HPF 50 Hz
is displayed. Only frequencies higher
mode, the
SFEQ
. function on after selecting the
H.P.F
function.
. func-
H.P.F
function
H.P.F.