Faults - Diamond AL4S/F Manual De Instalación, Uso Y Mantenimiento

ENGLISH
 Check the perfect sealing of the door
gaskets and replace them if necessary.
 Periodically
evaporation tray.
7.

FAULTS

The information shown below aims to help with
the identification and correction of any anomalies
and malfunctions which could occur during use.
Some of these problems can be resolved by the
GB
Problem
The refrigerator unit does not start
The refrigerator unit functions
continuously, cooling insufficiently
The refrigerator unit does not stop
Presence of ice inside the
evaporator
Appliance noise
clean the condensate
Causes
End of defrosting
No Voltage
Other causes
Room too hot
Dirty condenser
Insufficient door sealing
Insufficient quantity of
refrigerant gas
Resistances always inserted
Condenser fan at a standstill
Evaporator fan at a standstill
Probe faulty
Thermostat fault
Appliance not level
Resistances not functioning
Persistent vibrations
 Check that the electric connections have
not loosened.
 Check the efficiency of the heating
element
user. For the others, precise competency is
required and they must therefore only be carried
out by qualified staff.
It restarts after a pause of three
Check plug, sockets, fuses and







use the adjustable feet to level
check defrosting activation (only on
models with electric defrosting)
check that there is no contact
between the appliance and other
objects inside or outside
16
Solutions
minutes.
electric mains
Contact the after-sales
centre.
air the environment
clean the condenser
check the gaskets
Contact the after-sales
centre.
Contact the after-sales
centre.
Contact the after-sales
centre.
Contact the after-sales
centre.
Contact the after-sales
centre.
Contact the after-sales
centre.