Functionality - Diamond AL4S/F Manual De Instalación, Uso Y Mantenimiento

ENGLISH
5.2.

Functionality

Power On / Off of the PLC
Prog.1
14h UR60%
pressing the On/Off button
shows:
• the program (in this example Prog.1)
• the current phase (in this example, F1
indicates the phase 1)
GB • the time elapsed since the start, (in hours "h"
up to 96 hours, in days "d" over 96 hours)
• the relative humidity measured in%
• the temperature measured in the cell
OFF
pressing for at least 5 seconds the On/Off button
the display shows the OFF screen: In these
mode, all PLC outputs are forced off, and the PLC
itself enters
(equivalent to about 0.3W).
The electronic board has the following menus :
Menu 01
SetPoint
internal temperature.
Menu 02
Humidity
internal humidity.
Menu 03
Time
duration of the current program phases.
Menu 01 : Temperature SetPoint setting
Menu 01
SetPoint
By pressing the
temperature of the first phase of the program in
progress :
keys, it will be possible to change the
set temperature value. To confirm the value and
F1
15°C
At power
, the display
At power
a low-power operating
It allows to set the
It allows to set the
It allows to set the
key, the display shows the
Set 1: 0°C
Current: 0°C
. Using the
Menu 04
on by
Extractor
laps for the activation of the extractor fan for the
air exchange.
Menu 05
Pause
duration of the pause.
Menu 06
Fan Speed
speed (Function not enabled).
off by
Menu 07
Defrost
defrosting.
mode
Menu 08
Programs
selection.
Menu 09
Alarm
stored alarms.
Menu 11
Set Up
menu (parameters, outputs and inlets, languages
etc.)
move to the next step, press and hold
display shows the temperature of the second
phase of
Set 2:
Current:
way for the six available phases. To return to the
main menu press
8
It allows to set the time
It allows to set the time
It allows to set the fan
It starts a manual
Menu for the program
It allows to display the
Advanced settings
the program in progress
4°C
4°C
. Proceed in the same
.
; the
: