Recommendations For Use; Cleaning And Maintenance; Recommendations For Cleaning And Maintenance; Routine Maintenance - Diamond AL4S/F Manual De Instalación, Uso Y Mantenimiento

5.4.

Recommendations for Use

Prolonged Inactivity
If the appliance remains inactive for a long period,
proceed as follows:
1. Use the automatic disconnecting switch to
deactivate connection to the main electrical
line.
2. Clean the appliance and surrounding areas
thoroughly;
3. Spread a thin layer of cooking oil onto the
stainless steel surfaces;
4. Carry out all maintenance operations;
5. Leave the doors ajar to prevent the formation
of mould and/or unpleasant odours.
Recommendations for normal use
In order to ensure correct use of the appliance, it
is advisable to apply
recommendations:
 Do not obstruct the front and rear zones
above the condensing unit in order to favour
6.

CLEANING AND MAINTENANCE

6.1.

Recommendations for Cleaning and Maintenance

!
Before carrying out
intervention, activate
devices. In particular, deactivate the electrical
6.2.

Routine Maintenance

Routine maintenance consists of daily cleaning of
all the parts which can come into contact with
foodstuffs and the periodic maintenance of the
burners, nozzles and draining pipes.
Correct maintenance allows the user to maximise
performance levels and
constantly maintain safety requirements.
Do not spray the appliance with direct jets of
water or high pressure appliances.
When cleaning stainless steel, do not use iron
wool, brushes or scrapers as ferrous particles
could be deposited which, on oxidising, could lead
to rust.
To remove hardened residues, use wooden or
plastic spatulas or abrasive rubber pads.
6.3.

Extraordinary maintenance


Periodically have the following operations
carried out by specialised staff:
the following
any maintenance
all envisioned safety
operating life and
heat disposal from the condenser to a
maximum.
 Always keep the front of the condenser clean
using a soft brush and do not use rigid or
metal tools that may damage the condenser
fins.
 Check the planarity of the appliance rest
surface.
 Do not introduce liquid or solid substances at
temperatures
temperature and, however, introduce the
material after the appliance has reached the
functioning temperature.
 Do not stack the materials to be preserved in
contact with the internal walls, so blocking the
circulation of air, which guarantees uniformity
of the internal temperature of the refrigerated
compartment.
 Limit the number of times and the duration of
time the doors are open to a maximum.
power supply using the automatic disconnecting
switch.
During long periods of inactivity, spread a
protective layer on all stainless steel surfaces by
wiping them with a cloth soaked in Vaseline oil
and airing the rooms periodically.
!
Do not use products which contain
substances which are harmful and dangerous for
personal health (solvents, petrol etc.).
 Check functioning of the electric boards
and probes.
 Check the efficiency of the electrical
system.
 Periodically clean the condenser using
suitable tools (suction device or soft
brushes).
15
ENGLISH
above the environmental
GB