Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FOOD DEHYDRATOR
MODEL: FD-115
Dear customer!
We highly appreciate your choosing VES Electric home appliances. From
our side we guarantee excellent quality, perfect functioning and safety
of your appliance upon keeping to all the rules of home exploitation.
Before using the appliance read the instruction manual carefully
Technical characteristics:
Rated Voltage,V
Rated Frequency, Hz
Rated Power, W
BEFORE FIRST USE
Remove the appliance from the package. Do not leave the packing
(plastic bags, polystyrene etc.) within the reach of children since they
could be dangerous. Keep the package for appliance storage. Wash the
lid with trays in warm soapy water, rinse well and wipe dry.
base with wet soft cloth. Don't wash the base! Don't immerse the base,
power cord and plug in water!
PRODUCT DESCRIPTION
1 2 3
THE ASSEMBLY OF DRYING TRAYS
All of the drying trays must be installed in the position
shown in the picture, with the broad base at the bottom.
1) Put one of the drying trays on the base.
2) Top off with another drying tray.
3) Similarly, install the remaining trays on the base and
place the lid over them.
ENGL ISH
1. Temperature button
2. Timer button
6
3. On/off button
4. Base
5. Drying trays
5
6. Lid
PANEL
4
2
HEIGHT ADJUSTMENT OF THE TRAYS
The trays might be adjusted in 2 heights - normal and high. Normal
220-240~
50/60
550
Picture 1
whether you have food on them or not. Examples: 1) one tray of food
is put in the top position with 5 empty trays put below. Make sure that
the top lid is in the place. 2) two trays of food are put in the top and
Wipe the
assemble the appliance. Remember that hot air flow should freely cir-
culate into appliance, so do not overload the appliance, and don't make
several layers of food.
1. Place the base on a flat, smooth, heat-resistant surface where it will
not fall or be pulled by the plug.
2. Prepare food to be dehydrated. Lay food on the drying trays.
3. Place the drying trays with food onto the base.
4. Cover the drying trays with the lid.
5. Plug the applaince in. The LED display will twinkle.
When using the buttons, hold them for some seconds.
6. Select the desired temperature by pressing Temperature button.
Press and hold the button to set the desired temperature from 40°C
to 70°C.
7. Press Timer button to set the time. The timer is programmed up to
48 hours. For fast setting press and hold timer button. Each pressing
adds 1 hour.
E NGLISH
height is necessary for products with thick-
ness up to 2 cm, and high height - up to
3 cm.
To set normal height, rotate tray clockwise/
counterclockwise as to make the trays be
tightly pressed to each other (picture 1).
To set high height, turn the tray horizontally
on 180° clockwise/counterclockwise and put it
on the previous tray (picture 2).
Picture 2
It is recommended to assembly all 6 trays,
«second from top» position with 4 empty trays below.
Make sure that the top lid is in place.
MESH IN SET
Use the mesh to dry berries and cut verdure.
When drying place the mesh on the top tray.
MAINTENANCE
ATTENTION! Before first use, clean the lid and dry-
ing trays, according to "Cleaning" part, wipe dry and
3
Tabla de contenido
