Control Panel - EdilKamin CHARME Instalación Uso Y Mantenimiento

sk tecnica charme karma feeling multilingua_FOTOCOP_mod.qxp
USER INSTRUCTIONS

Control panel

switch on and off (press and keep pressed for two seconds), exit from the menu
access the menu
increases the value chosen
decreases the value chosen
(pellet load/reserve key)
press once to "inform" the stove memory that a 15 Kg bag of pellets has been loaded, enables the stove to
keep track of the reserve available
(boiler adjustment key)
enables a secondary circuit to be managed, for example a boiler, together with the +/– keys.
If the boiler probe is connected, the temperature of any external boiler/storage tank will appear on the right-hand side of
the display; press the "boiler" key to display the set point and rotate the knob on the right-hand side to change the boiler
set point.
If the boiler probe is not connected the temperature will be replaced by a series of dashes ( --- °C).
Right-hand dial: sets the temperature for the secondary circuit, for example the boiler
Left-hand dial: sets the temperature given off by the stove
Left-hand dial
Remote control (standard)
0/1 : switches on and off
Menù: accesses the menu
increase and decrease the various values
+/–
To use the remote control, point it at the stove.
An acoustic feedback confirms that the command has been received and the command is then carried out.
The commonest cause for remote control malfunctioning is flat batteries.
When replacing them, always dispose of the old ones correctly for recycling.
To replace the batteries, open the flap in the lower part of the front, using a flat screwdriver for leverage if necessary.
pellet load / reserve
Remote control receiver
Left-hand display
03/07/2009 12.25 Pagina 34
Boiler
Right-hand display
33
Right-hand dial