EdilKamin CHARME Instalación Uso Y Mantenimiento página 31

sk tecnica charme karma feeling multilingua_FOTOCOP_mod.qxp 03/07/2009 12.24 Pagina 32
KARMA – Fitting the outer housing
• Metal details provided
and used:
2 screws M6x25
2 screws M6x12
4 silicon spacers for ceramic top
8 flat washers Ø 6
- the 2 screws M6x25 and 2
flat washers M6 are used to attach
the upper frontage piece made of
ceramic (19).
- the 2 screws M6x12 and 2
flat washers M6 are used to attach
the lower frontage piece made of
ceramic (19).
- for the 4 spacers and the 4
washers, proceed as follows:
insert the 4 spacers for ceramic in
the 4 respective holes provided in
the cast iron top; apply the
ceramic top to ensure that it is
completely flush and add a flat
washer wherever necessary
between the silicon spacer and the
cast iron top, until the ceramic top
is perfectly flush with the stove.
Detail "X"
2 screws
The stove is delivered fully assembled. If for any reason you need to remove the housing, proceed as follows.
Unscrew the rear (80) and the two profiles (6); remove the lid and the cast iron top and the one made of ceramic (32).
Now pull the metal sides (84) out and, if necessary, also pull out the two aluminium profiles (83) clamped onto the baseplate hinges.
Now pull the front profile (19) out and then remove the upper rear frontage piece (24) from the clamps in the grid structure.
To remove the lower forward frontage piece (19), unscrew the two screws: see detailed drawing "X".
To reassemble, follow the same instructions in reverse.
31