Remote Control - EdilKamin SALLY Instalación Uso Y Mantenimiento

REMOTE CONTROL

This controls all the functions.
Key to buttons and display:
: to turn off and on (to go from "remote control on standby" to "remote control on")
+/- : to increase/decrease the various regulations
A : to select Automatic function
M
: to select Manual function and access the control and programming menus
The display also shows other useful information in addition to
the icons described above.
- Stand-by position:
shows room temperature (20°C), kg of pellets (15 kg) remai-
ning in tank and current time (15:33)
- Manual work phase:
shows power set (Power 1), room temperature (20°C), kg of
pellets and autonomy remaining (15 kg 21 hrs)
- Automatic work phase:
shows temperature set (Set 22°C), room temperature (20°C),
kg of pellets and autonomy remaining (15 kg 21 hrs).
DO NOT PRESS THE BUTTON MORE THAN ONCE
.
Note: If the radio control is not used for a few seconds, the
display will go dark as it has moved into the power-saving fun-
ction. The display can be reactivated by pressing any button.
INSTRUCTIONS FOR USE
- 38
- icon flashing: remote control searching for network
- icon fixed: remote control with connection enabled
keypad locked (press "A" and "M" in parallel for a few seconds
to lock or unlock the keypad)
flat battery (3 mini alkaline batteries type AAA)
programming enabled
alphanumeric display consisting of 16 figures arranged in two
lines of 8 figures
- icon flashing: stove turning on
- icon fixed: stove working
manual adjustment function (display shows working power)
automatic function (display shows temperature)
ONLY FOR SALLY PLUS
Push quickly "m" to enter into the MENU for the FAN SET-
TINGS. Inside the menu FAN SETTINGS, pushing "+" it
shows as follow :
- FRONT FAN
- FAN CANALIZ.
- SET CANALIZ.
• Inside the menu "FRONT FAN" it's possible to choose ON or
OFF by "M". To quit push
• Inside the menu "FAN CANALIZ" it's possible to choose ON
or OFF by "M", if "FRONT FAN" is ON it shows on the di-
splay the percentage of ducting (ex. 50%), it's possible to adjust
it from 30% to 90%, if "FRONT FAN" is OFF, it's not possible
to adjust the percentage of ducting. To quit push
• Inside the menu "SET CANALIZ." Pushing "M" it shows
SET CAN. MAN. – SET NOT ACTIVE – EXT NOT ACTIVE,
to quit push .
Activate the automatic ducting sown as "CANALIZ.SET 20°",
it's possible by an option probe (cod. 100290) and it must be
activated only by EDILKAMIN technical service.
To activate the handling of ducting by remote control (ex room
chrono-thermostat) shown as "EXTERNAL SET" it needs a
connection option cable (cod. 640560) and it must be activated
only by EDILKAMIN technical service.
-
.
.