Administration > Management - Cisco Linksys WRT320N Manual De Instrucciones

Chapter 3
Voice Device
QoS > Voice Device
Enter a Name
Enter a name for your voice device.
MAC Address
Enter the MAC address of your voice
device.
Priority
Select the appropriate
(Recommend), Medium, Normal or Low.
Click Add to save your changes. Your new entry will appear
in the Summary list.
Summary
This lists the QoS entries you have created for your
applications and devices.
Priority
This column displays the bandwidth priority of
High, Medium, Normal or Low.
Name This column displays the application, device or
port name.
Information
This column displays the port range or
MAC address entered for your entry. If a pre-configured
application or game was selected, there will be no valid
entry shown in this section.
Remove
Click this button to remove an entry.
Edit
Click this button to make changes.
Click Save Settings to apply your changes or click Cancel
Changes to cancel your changes.
Administration > Management
The Administration > Management screen allows the
network's administrator to manage specific Router
functions for access and security.
Dual-Band Wireless-N Gigabit Router
High
priority:
Management
Router Access
To ensure the Router's security, you will be asked for your
password when you access the Router's web-based utility.
The default is admin.
Router Password
Re-enter to confirm
confirm.
Web Access
Web Utility Access
is the communications protocol used to connect to servers
on the World Wide Web. HTTPS uses SSL (Secured Socket
Layer) to encrypt data transmitted for higher security.
Select HTTP or HTTPS. HTTP is the default.
Web Utility Access via Wireless
Router in a public domain where you are giving wireless
access to your guests, you can disable wireless access to
the Router's web-based utility. You will only be able to
access the utility via a wired connection if you disable
the setting. Keep the default, Enabled, to allow wireless
access to the utility or select Disabled to block wireless
access to the utility.
Remote Access
Remote Management
Router, from outside the local network, select Enabled.
Otherwise, keep the default, Disabled.
Web Utility Access
is the communications protocol used to connect to servers
on the World Wide Web. HTTPS uses SSL (Secured Socket
Layer) to encrypt data transmitted for higher security.
Select HTTP or HTTPS. HTTP is the default.
Advanced Configuration
Administration > Management
Enter a new password for the Router.
Enter the password again to
HTTP (HyperText Transport Protocol)
If you are using the
To permit remote access of the
HTTP (HyperText Transport Protocol)
24