Administration > Upgrade Firmware; Administration > Config Management; Status > Router - Cisco Linksys WRT54G2 Guia Del Usuario

Chapter 3
Administration > Upgrade Firmware
The Administration > Upgrade Firmware screen allows you
to upgrade the Router's firmware. Do not upgrade the
firmware unless you are experiencing problems with the
Router or the new firmware has a feature you want to use.
Administration > Upgrade Firmware
Before upgrading the firmware, download the Router's
firmware upgrade file from the Linksys website, www.
linksys.com. Then extract the file.
Upgrade Firmware
Please select a file to upgrade
the extracted firmware upgrade file. Then click Upgrade
and follow the on-screen instructions.
Administration > Config Management
This screen is used to back up or restore the Router's
configuration file.
Administration > Config Management
Backup Configuration
To back up the Router's configuration file, click Backup.
Then follow the on-screen instructions.
Restore Configuration
Please select a file to restore
the configuration file. Then click Restore.
Wireless-G Broadband Router
Click Browse and select
Click Browse and select
Advanced Configuration
Status > Router
The Status > Router screen displays the Router's current
status.
Status > Router
Router Information
Firmware Version
This is the Router's current firmware.
Current Time
This shows the time, as you set on the
Setup tab.
MAC Address
This is the Router's MAC Address, as seen
by your ISP.
Router Name This is the specific name for the Router,
which you set on the Setup tab.
Host Name
If required by your ISP, this would have been
entered on the Setup tab.
Domain Name
If required by your ISP, this would have
been entered on the Setup tab.
Internet
Configuration Type
This section shows the current network information
stored in the Router. The information varies depending on
the Internet connection type selected on the Setup > Basic
Setup screen.
Click Refresh to update the on-screen information.
21