Accessories - Technibel CWX3 Manual De Instalación

• To install the facade:
- Turn the two locking clips (5) downward.
- Attach the frame of the facade (6) to the unit with
the two hooks (7) by lining them up with the
locking clips (5).
Note (for CWX6-8-10 models)
- Observe the position of the facade frame as
the hooks are not the same size. Correctly
present them in front of the corresponding
locking clips.
- Check the correct position of the facade frame
in relation to the false ceiling. Adjust the
position of the internal unit, as required.
- Secure the facade frame to the unit using the
special screws and washers (8) provided.
- Fit the grille (3) making sure that the filter (9) is
correctly installed.
- Hook the grille safety cord to the frame, close the
grille and replace the lock retaining screws.

6 - ACCESSORIES

VALVE KIT - CODE 70600088 - CWX3-5
• The valve kit includes:
- the valve body,
- 2 swivel couplings,
- actuator (with 230V "On/Off" heating element).
• Assembly
A -Valve directly
connections
• Screw the "2 part" portion of the swivel coupling
on the female coupling of the unit. Use a stepped
spanner or a hex wrench. Put sealing compound
or Teflon tape on the threads.
Important: Hold the unit's couplings with a
wrench while tightening to avoid twisting the
tubes inside the unit.
• Screw the "1 part" portion of the swivel coupling
onto the valve threads.
Use sealing compound or Teflon on the threads.
on the unit's hydraulic
5
6
7
8
Female couplings
of the unit
Swivel coupling
("2 parts" portion)
Swivel coupling
("1 part" portion)
Valve
GB GB
5
9
3
11